Construction materials – Global Registered Certification

Product Certification

Contact Us

Tel. +82-70-4799-7450

Certification of building materials 305/2011/EU

305/2011/EU-CPR Directive on the use of mixed construction materials containing metal and steel reinforcement

89/106/EEC CPD was amended by 305/2011/EU CPR, which was adopted by the Secretariat on 10 July 2013.

Products certified under the old directive prior to July 1, 2013 will need to be certified under the new directive.

Structurally cross-section/outline of metal

For use in hot rolled, cold rolled or various shaped sections (T, L, H, U, Z, I, channel, corner, gutter, pipe), flat products (plate, sheet, strip), cast iron, wrought iron, corrosion treated and untreated steel bars, and construction materials mixed with metal and steel bars.

-Directive: 98/214/EC TS EN 10025-1 System 2+ TS EN 10088-4 System 2+ TS EN 10088-5 System 2+ TS EN 10210-1 System 2+ TS EN 10219-1 System 2+ TS EN 10340+AC System 2+ TS EN 10343 System 2+ TS EN 15048-1 System 2+ TS EN 15088 System 2+

Structurally cross-section/outline of metal

Building materials made of reinforced concrete - trusses, beams, columns, stairs, floor rafters, supports and board piles

Cut to the appropriate size for the specific application. It may be treated or untreated, welded or unwelded.

-Directive: 98/214/EC
TS EN 1090-1+A1 System 2+
TS EN 1090-1+AC System 2+

Structurally cross-section/outline of metal

Material Welding - Used for structural metal construction

Cut to the appropriate size for the specific application. It may be treated or untreated, welded or unwelded.

-Directive: 98/214/EC

TS EN 13479 System 2+

Structurally cross-section/outline of metal

Structurally connector

Metal rivets, screws (with spanner and washer) and high resistance screws (high strength rebar screws), round head nails, screws, rail latches

-Directive: 98/214/EC

TS EN 14399-1 System 2+

aggregate

Aggregate and material filling (reinforcement mixing and injection), (for construction, road and infrastructure works)

-Directive: 98/598/EC

TS 706 EN 12620+A1 System 2+

TS EN 14399-1 System 2+

TS 1114 EN 13055-1 System 2+

TS EN 13055-2 System 2+

TS 2717 EN 13139 System 2+

aggregate

Non-combined and hydraulically combined mixtures (for road and other construction works)

-Directive: 98/598/EC

TS EN 13242+A1 System 2+

aggregate

Asphalt mixture for surface application (for roads and other construction works)

-Directive: 98/598/EC

TS EN 13043 System 2+

aggregate

Protective layer discs, water structures and other infrastructure works, railway ballast (for railway works)

-Directive: 98/598/EC

TS EN 13383-1+AC System 2+

TS 7043 EN 13450+AC System 2+

Product Certification

Contact Us

Certification of building materials 305/2011/EU

305/2011/EU-CPR Directive on the use of mixed construction materials containing metal and steel reinforcement

89/106/EEC CPD was amended by 305/2011/EU CPR, which was adopted by the Secretariat on 10 July 2013.

Products certified under the old directive prior to July 1, 2013 will need to be certified under the new directive.

Structurally cross-section/outline of metal

For use in hot rolled, cold rolled or various shaped sections (T, L, H, U, Z, I, channel, corner, gutter, pipe), flat products (plate, sheet, strip), cast iron, wrought iron, corrosion treated and untreated steel bars, and construction materials mixed with metal and steel bars.

-Directive: 98/214/EC TS EN 10025-1 System 2+ TS EN 10088-4 System 2+ TS EN 10088-5 System 2+ TS EN 10210-1 System 2+ TS EN 10219-1 System 2+ TS EN 10340+AC System 2+ TS EN 10343 System 2+ TS EN 15048-1 System 2+ TS EN 15088 System 2+

Structurally cross-section/outline of metal

Building materials made of reinforced concrete - trusses, beams, columns, stairs, floor rafters, supports and board piles

Cut to the appropriate size for the specific application. It may be treated or untreated, welded or unwelded.

-Directive: 98/214/EC TS EN 1090-1+A1 System 2+ TS EN 1090-1+AC System 2+

Structurally cross-section/outline of metal

Material Welding - Used for structural metal construction

Cut to the appropriate size for the specific application. It may be treated or untreated, welded or unwelded.

-Directive: 98/214/EC

TS EN 13479 System 2+

Structurally cross-section/outline of metal

Structurally connector

Metal rivets, screws (with spanner and washer) and high resistance screws (high strength rebar screws), round head nails, screws, rail latches

-Directive: 98/214/EC

TS EN 14399-1 System 2+

aggregate

Aggregate and material filling (reinforcement mixing and injection), (for construction, road and infrastructure works)

-Directive: 98/598/EC

TS 706 EN 12620+A1 System 2+

TS EN 14399-1 System 2+

TS 1114 EN 13055-1 System 2+

TS EN 13055-2 System 2+

TS 2717 EN 13139 System 2+

aggregate

Non-combined and hydraulically combined mixtures (for road and other construction works)

-Directive: 98/598/EC

TS EN 13242+A1 System 2+

aggregate

Asphalt mixture for surface application (for roads and other construction works)

-Directive: 98/598/EC

TS EN 13043 System 2+

aggregate

Protective layer discs, water structures and other infrastructure works, railway ballast (for railway works)

-Directive: 98/598/EC

TS EN 13383-1+AC System 2+

TS 7043 EN 13450+AC System 2+

GRC

Global Registered Certification

서울시 구로구 디지털로 272 한신IT타워 812호

#812, HANSHIN IT TOWER, 272, Digital-ro, Guro-gu, Seoul, Korea

GRC

Global Registered Certification

#812, HANSHIN IT TOWER, 272, Digital-ro, Guro-gu, Seoul, Korea

전체메뉴

제품인증

공지사항

시스템인증

ERCA 교육

회사소개

-Directive: 98/214/EC
TS EN 1090-1+A1 System 2+
TS EN 1090-1+AC System 2+